Rigid Polyurethane Foam products used on vihicles
Rigid Polyurethane Foam
Rigid polyurethane products deliver a unique combination of properties:
wood simulation, Shell ,
According to the density we supply three kinds Products
Density ≤400kg/mз:
Decorative Frame,Decoration strip& Trim strip,Article Stuff. Completely could take the place of All kinds of gesso adornment
Density Between 400kg/mз To 600kg/mз:
Various kinds of Furniture Parts & wood-imitation & Shell of mostly House Appliance like PC Enclosure.
Density ≥600kg/mз:
It shall be regards as reinforced structure material. Special Industry Application: In addition to Piano shell& Skis, it is used on the Insulative Floor, electrostatic shielding cabinet.
Mass transit polyurethane foam Introduction
Polyurethanes are used throughout cars. In addition to the foam that makes car seats
comfortable, bumpers, interior “headline” ceiling sections, the car body, spoilers, doors
and windows all use polyurethanes. Polyurethane also enables manufacturers to provide
drivers and passengers significantly more automobile “mileage” by reducing weight and
increasing fuel economy, comfort, corrosion resistance, insulation and sound absorption.
Xingang Company
Specializing in the design and manufacture of custom molded polyurethane foam parts,
we have at our disposal various kinds of different formulations of raw material.
Hardness from 3ibs to 60ibs on the shore A. Both available in C and D
Our 15 years of experience in polyurethane molding allow us to manufacture from simple
to very complex custom parts.
We are expert in designing and producing Customized pur foam parts.
Welcome to send us your request about your automotive pur parts goals.
We will help to find out the best Polyurethane parts solution!!
Parameters Form
| Items | Unit | No fibreglass fabrics
value | Two layers fibreglass fabrics
value |
| Density | g/cmз | 0.3～0.6 | 0.47~0.6 |
| Water absorption | g/cmз | | 0.001~0.01 |
| Tensile strength | Mpa | 6.86～13.7 | 588.4~784.8 |
| Bending strength | Mpa | 7.84～32.3 | 441.3~486.5 |
| Compression strength | Mpa | | 392.3~588.4 |
| Impact resistance | KJ/㎡ | 9.8～19.6 | ≥30 |
| Linear expansion | % | | 0.2~0.4 |
| Distortion temperature | ℃ | | 87 |
| Volume resistivity | Ω.㎝ | | 1013~1014 |
| Surface resistivity | Ω | | 2×1013 |
Values not absolute some may be altered.
TIPS
RIM is the result of a reaction between two liquid components isocyanate and polyol
as they are injected into a closed mould at low pressure. The two components are
mixed together as they flow into the mould as a low viscosity liquid and the reaction, which increases the temperature and the pressure at the surface of the tool,
forms the polyurethane part in the tool cavity.
Polyurethane resins for RIM have grown into a broad range of formulations with
particular physical properties for specific performance requirements.
Rapid types can produce virtually anything from flexible elastomer substitutes,
to foam-core parts to extremely rigid, solid and thin-walled components.
Parts can be supplied primed, painted or surface treated with graphics to simulate
various textures such as carbon fibre.
|
|
Rigid Polyurethane Foam products used on vihicles Images
|
